Instead of being a jerk and getting a new book, i decided to create a new book cover for the book. after thinking about various book covers, i decided that the best course of action would be to make a book cover out of wood.. With just a jigsaw and a power drill, and a few metal rings, you can make your own diy wooden journal! time: 30-60 minutes, cost: under $5.00! these diy wooden journals make easy diy gift ideas, too! personalize it with a wood burning tool.. Make: projects laser-cut book covers . by craig couden; print this project the trick to making the wood flexible is to break it up in a lot of small pieces that can all twist a little. all these tiny twists add up so you can bend the sheet without stressing the material too much..
To make a book cover with a brown paper bag, start by cutting the bag open and removing any handles. then, center the open book on the paper and draw a horizontal line along the top and bottom edges of the book.. 3. once the glue has had time to dry (drying times vary based on the type of glue you use), cut two pieces of wood veneer that are slightly larger (about 1/4 inch excess all the way around is great) than what you’ll need to cover the front and back of the notebook. 4. attach the first piece of veneer to the front of the notebook, with glue.. We are now ready to stitch the book together. grab one cover and one signature, and place the wood down so the outside of the cover is laying face down on the table. take each needle and sew through the inside of the signature, like a “u”. go around the outside of the cover and thread the needle through the outside of the cover in..
